SELECT DEVICES
Stump cutter is a professional device for grinding stubs/trunks remaining after tree cutting. Cutting disc with diameter of 400 mm used in the construction allows the grinding deep below ground level. There are 12 cutting knives installed on the disc - 4 of them with right blades, 4 with left ones and 4 with straight ones. This configuration allows to perform precise movements of the cutter to the right and left direction, and thus grind trunks thoroughly. Stump cutter is driven by a 25 hp gasoline engine with electric start-up.
This stump machine proves excellent in any operating conditions, that is on the roads, in parks, forest areas, etc.
|
MODEL |
SKORPION F400 |
| Overall dimension (LxWxH) [mm] | 1900 x 810 x 800 |
| Weight [kg] | 174 |
| Diameter of cuttor [mm] | 400 |
| No. of knives cutting | 12 |
| ENGINE TECHNICAL DATA | |
| Engine model | KOHLER Command PRO CH742 |
| Type of engine | 4-suwowy |
| Engine cubic capacity [cm3] | 747 |
| Power of engine [KM] | 25 |
| Type of cooling | air |
| Type of fuel | petrol |
| Fuel tank capacity [l] | 10 |
| Start-up | elektric |
.jpg)
